In many instances, such as in the gears of a steam turbine, water can become mixed with the lubricant, and rusting of ferrous parts can occur, HK-3080XS Oils Corrosion Tester is used to indicates how well inhibited mineral oils aid in preventing this type of rusting according to  GB/T 11143-2008 ã€ŠStandard test method for Rust-preventing Characteristics of inhibited oil in the presence of water》, adopting stainless steel bath and intelligent PID temperature control system, Anti-corrosion and durable, which is one kind of necessary instrument for testing/analyzing petroleum products.

A mixture of 300ml of the oil under test is stirred with 30 ml of distilled water or synthetic sea water, as required, at a temperature of 60±1℃ with a cylindrical steel test rod completely immersed therein. It is recommended to run the test for 4hï¼› however, the test period may, at the discretion of the contracting parties, be for a shorter or longer period. The test rod is observed for signs of rusting and, if desired, degree of rusting. 

â—† Adopts the 800*480 LED touch screen, Chinese and English are optional.  Easy- operation with the prompt menu.

â—† Adopts the PID intelligent temperature control technology, users can pre-set temperature within the temperature control range.

â—† Easily software upgrading and maintenance through the USB connector.

â—† Intelligent measure the water level, in avoid to dry heating.

â—† With the precise timing function, easy for operation.

1、 Testing hole：4   

2、 Temperature control range：Room temperature～100℃

3、 Temperature measurement error ï¼š±0.5℃  

4、 Temperature control accuracy ï¼š±1℃  

5、 Temperature resolution：0.1℃

6、 Temperature control time：0～99h（optional）

7、 Stirring speed：1000r/min

8、 Outside dimension & Weight：L490×W403×H622mm, 65Kg.

Application Environment：

1、 Power supply：1）AC220V, 50/60HZ; AC240V, 50 HZ; 2）AC120V, 60HZ(Optional).

2、 Consumption Power：≤2650W    

3、 Ambient temperature： ï¼ˆ0～40)℃；

4、 Ambient relative humidity：≤85%RH

# The instrument should be put into a no air flow laboratory and on a stable and no glare table.

# The laboratory should have fire extinguisher and other extinguish material.

# Don’t put any inflammable、explosive and strong corrosive gas or liquid around the instrument, no strong electromagnetic interference and obvious mechanical shock.